Silver Floor Tile Glue Home Decoration Anti Mildew Mold Resistant

Silver Tile Floor Tile Floor Heating Home Decoration Anti Mildew Beauty Glue

Factory Information:

With 20 years of glue-making experience, the factory covers an area of 40,000 square meters, is equipped with highly

mechanized equipment, has a daily output of 30,000 pieces, and more than 200 production and R&D personnel. The source

factory supports OEM/ODM. The products have high cost performance. We look forward to your contact.

 

Usage Method:
 

• Prepare Tools and Materials - Grout, glue gun, gap cleaning tools (such as utility knife, shovel, gap cleaning cone,

etc.), vacuum cleaner, masking tape (optional), seam pressing tools (such as seam pressing ball, seam pressing

stick, etc.), rag.
 

• Clean the Gaps - Use gap cleaning tools to clean the dust, debris, cement, etc. in the tile gaps, ensuring the gap

depth reaches about 3mm. - Then use the vacuum cleaner to suck the dust in the gaps.
​

• Wipe the Gaps - Wipe the gaps with a damp rag to ensure they are clean and free of dust residue.

​

• Paste Masking Tape (Optional) - If you are worried about the grout staining the tile surface, you can paste masking t
• 
  ape on both sides of the tile gaps.

​

• Install the Nozzle - According to the size of the gap, select the appropriate nozzle and install it on the grout bottle.
  Cut the front end of the nozzle into a 45-degree angle with a utility knife.

​

• Load into the Glue Gun - Load the grout into the glue gun.

• Apply the Glue - Hold the glue gun, align the nozzle with the gap, and press the trigger of the glue gun evenly to fill
  
  the gap with grout.

• Press the Seams - 10 - 15 minutes after the grout is applied (the specific time depends on the curing speed of the
  
  grout), use the seam pressing tool to press along the gap to make the surface of the grout smooth and flat.

• Clean the Residual Materials - After the grout is cured (usually about 24 hours), use a shovel to remove the excess
  
  grout on the tile surface.

• Inspection and Rectification - Inspect the grouting effect. If there are uneven or omitted places, rectify them.

Contact

Factory Pictures