Highlight:
Chemical Anchor Rebar Planting Adhesive
, Concrete Anchor Rebar Planting Adhesive
, Concrete Anchor Epoxy Resin Ab Glue
Concrete Chemical Anchor Rebar Planting Adhesive Epoxy Resin Ab Glue
Bar Planting Concrete Chemical Anchor Glue Sealant Epoxy Resin Ab Adhesive
Factory Information:
With 20 years of experience in adhesive production, the factory covers an area of 40,000 square meters, equipped with highly
mechanized facilities. The daily output reaches 30,000 pieces, and there are over 200 production and R&D personnel. We are
an original factory supporting OEM/ODM. Our products are cost-effective. Looking forward to your contact.
Type
Chemical anchor adhesive
Product name
Epoxy anchor Adhesive
Application
Fix steel bar and bolt in concrete
Packing
30/25 cartridges in 1carton
Typical application
* Suitable for high-speed railways, highways, bridges, tunnels and subways and other occasions with high anchorage
performance requirements
* Suitable for planting screws and steel bars on the base material in reinforcement and renovation projects.
* Installation of various equipment, pipelines, and fixing of curtain wall brackets.
* Bonding and fixing of wooden components, plastic components and metal components.
|
Performance Indexes
|
|
Split tensile strength
|
8.75Mpa
|
|
Flexural strength
|
76.7Mpa,and No rupture-like damage
|
|
Compressive strength
|
126.6Mpa
|
|
Steel-steel tensile anti-shear strength
|
(23±2)℃(50±5)%RH
|
18.2Mpa
|
|
Bonding strength between ribbed steel bars (or full screws) and concrete under constrained pull-out conditions
|
C30, Φ25, L=150mm
|
17.9Mpa
|
|
Non-volatile matter content
(solid content)
|
99.1%
|
Product Features:
- Room-temperature curing, high strength. It has a relatively high bonding strength, capable of providing reliable
- anchoring force, tightly combining the rebar with the base material as if it were pre-embedded.
- Strong adhesion: It has good adhesion performance to materials such as rebar and concrete.
- Good durability: It has excellent anti-aging, acid and alkali resistance, water resistance and other properties, and
- can maintain stable performance for a long time under various environmental conditions.
- Low shrinkage during hardening: It can reduce problems such as hollowing or cracks caused by colloid shrinkage.
- Excellent toughness and impact resistance: After curing, it has good toughness and can withstand certain impacts
-
- and vibrations.
- Wide glue-mixing ratio: The glue-mixing ratio of components A and B is wide, facilitating on-site operation and
-
- adjustment.
- Good temperature resistance: Some rebar-planting adhesives have good heat resistance and can be welded after
-
- rebar embedding.
Usage Method:
- Drilling - Drill holes at the positions where rebar is to be implanted according to the design requirements using an
-
- electric drill.
-
-
- Hole cleaning - Use a brush or blower to remove dust and debris from the holes, then wipe the hole walls with
-
- or alcohol to ensure the holes are clean and dry.
-
-
- Rebar treatment - Use a wire brush to remove rust and oil stains from the rebar surface, and wipe it clean with
-
- or alcohol.
-
-
- Glue-mixing - Mix the glue liquids of components A and B in accordance with the proportion specified in the rebar-
-
- planting glue product manual, and stir evenly.
-
-
- Glue injection - Inject the well-stirred rebar-planting glue into the holes using a glue injector or syringe. Generally,
-
- the glue injection volume should reach about 2/3 of the hole depth.
-
-
- Implant rebar - Insert the treated rebar quickly into the hole, rotate the rebar in a certain direction to evenly distribute
-
- the glue liquid and expel the air from the hole.
-
-
- Curing and maintenance - According to the curing time of the rebar-planting glue, avoid disturbing the rebar during
-
- the curing period. Under normal temperature, it usually takes several hours to several days to fully cure.
FAQ
Q: What is the minimum order quantity?
A: Small order is welcomed, we accept small order.
Q: What is delivery time?
A: About 15 days depend on quantity required after deposit. Except public holidays.
Q: How can you guarantee the quality?
A: We have rigorous quality test system, from raw materials to finished products, the materials must be inspected and signed
by QC staff.
Q: How long can I get a quote?
A: The quotation could be provided within 24 hours once we know all detailed requirements.
Q: Can I get a sample?
A: Yes free samples are available. Delivery cost is to be paid by clients.
Q: Can you provide OEM service?
A: Yes, we can produce under your own brand name. Logo and packing design need to be provided so
as to make customized brand name.
Factory Pictures
Contact:
| WhatsApp |
+86 13302391599 |
| Telephone |
+86 13302391599 |
| Email |
mangrove88@126.com |
Your message must be between 20-3,000 characters!
