Quick Drying Strong Type Weather Resistant Silicone Sealant Good Flexibility

Quick Drying Strong Type Weather Resistant Silicone Sealant Direct Selling

Sealant Factory Information:

With 20 years of experience in glue production, the factory covers an area of 40,000 square meters

equipped with highly mechanized equipment. The daily output is 30,000 pieces and there are more than 200 production and

R & D personnel. The source factory supports OEM/ODM. The products are cost-effective. We look forward to your concult

Application Areas:

◇ Joint sealing of glass, aluminum alloy, concrete, ceramics, wood, etc.
 

◇ Industrial application of windows and doors.
 

◇ Sealing of walls

How to use:
 

1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
 

of the product.

2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
 

after cleaning.
 

3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
 

surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
 

4. Suitable application temperature range 5°C to 40°C.

Use Limitations

◇ To structural use.
 

◇ To all surfaces that bleed oils, plasticizers or solvents, and some uncured or sulfurized rubber.
 

◇ To the unventilated space or the surface which can touch the food or water directly.
 

◇ When the surface’s temperature is below 4℃ or above 45℃ .
 

◇ To the circumstances as immersed in water for a long time, moist all the year, as well as frost or wet surfaces.
 

◇ To materials contained copper or copper alloy, painted surface, which may cause paint cracking or paint stripping.
 

◇ To the surfaces with lime power, concrete or sand again.
 

Please read company’s technical files before application. Compatibleness test and bonding test must be done for construction
 

materials before application.
 

Processing
 

The substrate to be in contact with the sealant must be clean, dry and free of all loose materials, dust, dirt, rust, oil, and
 

other contaminants. Extrude the sealant with caulking gun to the working area and trim it before sealant cured. Do not touch the
 

trimmed area again o avoid damage or aesthetic appearance.

Factory pictures

FAQ

Q1. When can I receive my products?

A1: Sample order need 1 - 3 days.

Mass production need 7- 10 workdays.

Q2. Can you send me samples for reference?

A2: Yes, we are glad to send you free samples.

Q3. Can you provide OEM service?

A3: Yes, and we can custom the volume and tube package.

Q4: Where is your factory? Can I visit it?

A4:Our factory locate in Guangdong Province, welcome to visit us anytime!

Q5: What is the payment term that you can provide?

A5: Sample 100% payment.

30% TT prepayment and 70% balance payment for mass order.