Fast Drying General Weather Resistant Silicone Sealant Windshield
Fast Drying General Weather Resistant Silicone Sealant Windshield
Factory Information:
With 20 years of glue-making experience, the factory covers an area of 40,000 square meters, equipped with highly mechanized
equipment. The daily output is 30,000 pieces, and there are more than 200 production and R&D personnel. The source factory
supports OEM/ODM. The products have high cost performance. We look forward to your contact.
Main Raw Material
Silicone
Usage
Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking
Other Names
Silicone Sealant
Classification
Other Adhesives
Type
one component silicone sealant
Product name
one Component Silicone Sealant
Product Feature:
1. Single component, easy to use, good extrudability and thixotropy in the temperature range of 4°C ~ 40°C, can be applied
directly by using a glue gun;
2. After curing, it will not become brittle, harden or crack at low temperatures of -30°C. It will not soften or degrade at high
temperatures, but will shrink to a certain extent and increase in hardness;
3. Excellent weathering resistance, aging, UV, ozone and water resistance;
4. Excellent resistance to high and low temperatures, will not become brittle, hardened or cracked at -30°C after curing, and
will not become soft and degraded at high temperatures, but there is a certain shrinkage, and the hardness has increased;
5. Good adhesion, forming a strong seal with most building materials when cured without the need for a primer;
6. Good compatibility with other neutral silicone adhesives.
Main Application:
1. All kinds of doors and windows installation, stone caulking sealing;
2. Various small aluminium panels and glass walls;
3. Kitchen and bathroom installation;
4. Caulking and sealing of indoor metal structure projects;
5. Other uses tested and applicable.
How to use:
1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitability
of the product.
2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutes
after cleaning.
3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with the
surface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.
4. Suitable application temperature range 5°C to 40°C.
Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.
|
No
|
Test Item
|
Unit
|
Actual results
|
|
1
|
Appearance
|
-
|
Smooth, no air bubbles, no lumps
|
|
2
|
Tack free time(at what % humidity)
|
min
|
10
|
|
3
|
Slump
|
Vertical
|
mm
|
0
|
|
Horizontal
|
mm
|
Not deformed
|
|
4
|
Extrusion
|
ml/min
|
573
|
|
5
|
Shore A hardness /72h
|
-
|
35
|
|
6
|
Shrinkage
|
%
|
/
|
|
7
|
Effect of heat aging on
|
-
|
|
|
|
- Weight loss
|
%
|
8.7%
|
|
|
- Cracking
|
-
|
No
|
|
|
- Chalking
|
-
|
No
|
|
8
|
Tensile adhesion
|
Mpa
|
|
|
|
- Standard condition
|
|
0.93
|
|
|
- Immersion in water
|
|
/
|
|
|
- Dry at 100°C
|
/
|
|
9
|
Elongation at break
|
|
%
|
320
|
|
10
|
Specific gravity
|
g/cm3
|
1.51
|
|
11
|
Completely dry
|
hours
|
30
|
|
12
|
Temperature Resistence
|
°C
|
-50℃~150℃
|
|
13
|
Application Temperature
|
°C
|
4℃~40℃
|
|
14
|
Color
|
|
White
|
Factory pictures
Contact:
| WhatsApp |
+86 13302391599 |
| Telephone |
+86 13302391599 |
| Email |
mangrove88@126.com |
FAQ
Q1. When can I receive my products?
A1: Sample order need 1 - 3 days.
Mass production need 7- 10 workdays.
Q2. Can you send me samples for reference?
A2: Yes, we are glad to send you free samples.
Q3. Can you provide OEM service?
A3: Yes, and we can custom the volume and tube package.
Q4: Where is your factory? Can I visit it?
A4:Our factory locate in Guangdong Province, welcome to visit us anytime!
Q5: What is the payment term that you can provide?
A5: Sample 100% payment.
30% TT prepayment and 70% balance payment for mass order.
Your message must be between 20-3,000 characters!
